Browse Source

n/tor: Added tor-0.4.2.5.

current-20191101
Damien Goutte-Gattat 2 years ago
parent
commit
613b4e2848
  1. 24
      n/tor/doinst.sh
  2. 39
      n/tor/rc.tor
  3. 12
      n/tor/slack-desc
  4. 1
      n/tor/tor-0.4.2.5.tar.gz.sha256
  5. 135
      n/tor/tor.SlackBuild
  6. 14
      n/tor/tor.logrotate
  7. 254
      n/tor/torrc

24
n/tor/doinst.sh

@ -0,0 +1,24 @@
#!/bin/sh
config()
{
NEW="$1"
OLD="`dirname $NEW`/`basename $NEW .new`"
if [ ! -r $OLD ]; then
mv $NEW $OLD
elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then
rm $NEW
fi
}
config etc/tor/torrc.new
if ! grep ^tor: /etc/group > /dev/null ; then
/usr/sbin/groupadd -g 281 tor
fi
if ! grep ^tor: /etc/passwd > /dev/null ; then
/usr/sbin/useradd -u 281 -c Tor -d /var/lib/tor -g tor tor
fi
chown tor:tor var/{lib,log,run}/tor
chmod 0700 var/lib/tor

39
n/tor/rc.tor

@ -0,0 +1,39 @@
#!/bin/bash
PIDFILE=/var/run/tor/tor.pid
case "$1" in
start)
/usr/bin/tor
;;
stop)
if [ -f $PIDFILE ]; then
kill -15 $(< $PIDFILE)
fi
;;
reload)
if [ -f $PIDFILE ]; then
kill -1 $(< $PIDFILE)
fi
;;
status)
if [ -f $PIDFILE ] && kill -0 $(< $PIDFILE) ; then
echo "Tor is running."
else
echo "Tor is not running."
fi
;;
restart)
$0 stop
sleep 1
$0 start
;;
*)
echo "Usage: $0 {start|stop|restart|reload|status}"
;;
esac

12
n/tor/slack-desc

@ -0,0 +1,12 @@
|-----handy-ruler-----------------------------------------------------|
tor: tor (The Onion Router)
tor:
tor: Tor protects your privacy on the Internet by hiding the connection
tor: between your Internet address and the services you use.
tor:
tor:
tor:
tor:
tor:
tor:
tor:

1
n/tor/tor-0.4.2.5.tar.gz.sha256

@ -0,0 +1 @@
4d5975862e7808faebe9960def6235669fafeeac844cb76965501fa7af79d8c2 tor-0.4.2.5.tar.gz

135
n/tor/tor.SlackBuild

@ -0,0 +1,135 @@
#!/bin/bash
# Build script for Slackware
# Copyright (C) 2019 Damien Goutte-Gattat
#
# Redistribution and use of this script, with or without modifications,
# is permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
# IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# Contact: Damien Goutte-Gattat <dgouttegattat@incenp.org>
#
# Latest tor sourcecode is available at: <https://torproject.org/>.
# Source package infos
NAMESRC=${NAMESRC:-tor}
VERSION=${VERSION:-0.4.2.5}
ARCHIVE=${ARCHIVE:-$NAMESRC-$VERSION.tar.gz}
WGET=${WGET:-https://dist.torproject.org/$ARCHIVE}
# Build infos
NAMEPKG=${NAMEPKG:-tor}
BUILD=${BUILD:-1GGD}
ARCH=${ARCH:-$(uname -m | sed 's/^i.86$/i486/;s/^arm.*/arm/')}
JOBS=${JOBS:-1}
EXT=${EXT:-txz}
# Directories
TMP=${TMP:-/tmp}
OUT=${OUT:-$TMP/build}
PKG=${PKG:-$OUT/$NAMEPKG}
CWD=$(pwd)
set -e # Quit if a command returns non-zero
# Sanity checks
if [ $UID -eq 0 ]; then
echo "You should NOT run this script as ROOT!"
exit 1
fi
if [ ! -d $TMP ]; then
echo "$TMP does not exists or is not a directory!"
exit 1
fi
# Compilation flags
case "$ARCH" in
i?86)
CPUOPT="-O2 -march=$ARCH -mtune=i686"
;;
x86_64)
CPUOPT="-O2 -fPIC"
;;
*)
CPUOPT="-O2"
;;
esac
# Get and verify the source archive
if [ ! -r $ARCHIVE ]; then
wget -c -O $ARCHIVE.part "$WGET"
mv $ARCHIVE.part $ARCHIVE
fi
sha256sum -c $ARCHIVE.sha256
NAME=$(tar ft $ARCHIVE | head -n 1 | cut -d / -f 1)
# Compile
cd $TMP
echo "Building $ARCHIVE..."
tar xf $CWD/$ARCHIVE
cd $NAME
CFLAGS=$CPUOPT \
CXXFLAGS=$CPUOPT \
./configure \
--prefix=/usr \
--libdir=/usr/lib$LIBDIRSUFFIX \
--sysconfdir=/etc \
--mandir=/usr/man \
--docdir=/usr/doc/$NAME \
--localstatedir=/var \
--with-tor-user=tor \
--with-tor-group=tor \
--disable-dependency-tracking \
--build=$ARCH-slackware-linux
make -j $JOBS
make install-strip DESTDIR=$PKG
# Compress man pages
find $PKG/usr/man -type f -exec gzip -9 {} \;
# Install the documentation
install -m 644 CONTRIBUTING ChangeLog LICENSE README ReleaseNotes $PKG/usr/doc/$NAME
# Install RC script
install -D -m 644 $CWD/rc.tor $PKG/etc/rc.d/rc.tor
# Install custom config file
install -m 644 $CWD/torrc $PKG/etc/tor/torrc.new
# Install logrotate config
install -D -m 644 $CWD/tor.logrotate $PKG/etc/logrotate.d/tor
# Create runtime directories
mkdir -p $PKG/var/{lib,log,run}/tor
# Copy slack-desc and doinst.sh files
install -D -m 644 $CWD/slack-desc $PKG/install/slack-desc
install -m 755 $CWD/doinst.sh $PKG/install/doinst.sh
# Package the tree
cd $PKG
mkdir -p $OUT
PACKAGING="
chown root:root . -R
/sbin/makepkg -l y -c n $OUT/$NAMEPKG-$VERSION-$ARCH-$BUILD.$EXT
rm -rf $PKG
rm -rf $TMP/$NAME
"
if type -p fakeroot ; then
echo "$PACKAGING" | fakeroot
else
su -c "$PACKAGING"
fi

14
n/tor/tor.logrotate

@ -0,0 +1,14 @@
/var/log/tor/*log {
su tor tor
daily
rotate 5
compress
delaycompress
missingok
notifempty
create 0644 tor tor
sharedscripts
postrotate
/etc/rc.d/rc.tor reload > /dev/null
endscript
}

254
n/tor/torrc

@ -0,0 +1,254 @@
## Configuration file for a typical Tor user
## Last updated 28 February 2019 for Tor 0.3.5.1-alpha.
## (may or may not work for much older or much newer versions of Tor.)
##
## Lines that begin with "## " try to explain what's going on. Lines
## that begin with just "#" are disabled commands: you can enable them
## by removing the "#" symbol.
##
## See 'man tor', or https://www.torproject.org/docs/tor-manual.html,
## for more options you can use in this file.
##
## Tor will look for this file in various places based on your platform:
## https://www.torproject.org/docs/faq#torrc
## Tor opens a SOCKS proxy on port 9050 by default -- even if you don't
## configure one below. Set "SOCKSPort 0" if you plan to run Tor only
## as a relay, and not make any local application connections yourself.
#SOCKSPort 9050 # Default: Bind to localhost:9050 for local connections.
#SOCKSPort 192.168.0.1:9100 # Bind to this address:port too.
## Entry policies to allow/deny SOCKS requests based on IP address.
## First entry that matches wins. If no SOCKSPolicy is set, we accept
## all (and only) requests that reach a SOCKSPort. Untrusted users who
## can access your SOCKSPort may be able to learn about the connections
## you make.
#SOCKSPolicy accept 192.168.0.0/16
#SOCKSPolicy accept6 FC00::/7
#SOCKSPolicy reject *
## Logs go to stdout at level "notice" unless redirected by something
## else, like one of the below lines. You can have as many Log lines as
## you want.
##
## We advise using "notice" in most cases, since anything more verbose
## may provide sensitive information to an attacker who obtains the logs.
##
## Send all messages of level 'notice' or higher to /usr/var/log/tor/notices.log
Log notice file /var/log/tor/notices.log
## Send every possible message to /usr/var/log/tor/debug.log
#Log debug file /usr/var/log/tor/debug.log
## Use the system log instead of Tor's logfiles
#Log notice syslog
## To send all messages to stderr:
#Log debug stderr
## Uncomment this to start the process in the background... or use
## --runasdaemon 1 on the command line. This is ignored on Windows;
## see the FAQ entry if you want Tor to run as an NT service.
RunAsDaemon 1
User tor
PidFile /var/run/tor/tor.pid
## The directory for keeping all the keys/etc. By default, we store
## things in $HOME/.tor on Unix, and in Application Data\tor on Windows.
DataDirectory /var/lib/tor
## The port on which Tor will listen for local connections from Tor
## controller applications, as documented in control-spec.txt.
#ControlPort 9051
## If you enable the controlport, be sure to enable one of these
## authentication methods, to prevent attackers from accessing it.
#HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C
#CookieAuthentication 1
############### This section is just for location-hidden services ###
## Once you have configured a hidden service, you can look at the
## contents of the file ".../hidden_service/hostname" for the address
## to tell people.
##
## HiddenServicePort x y:z says to redirect requests on port x to the
## address y:z.
#HiddenServiceDir /usr/var/lib/tor/hidden_service/
#HiddenServicePort 80 127.0.0.1:80
#HiddenServiceDir /usr/var/lib/tor/other_hidden_service/
#HiddenServicePort 80 127.0.0.1:80
#HiddenServicePort 22 127.0.0.1:22
################ This section is just for relays #####################
#
## See https://www.torproject.org/docs/tor-doc-relay for details.
## Required: what port to advertise for incoming Tor connections.
#ORPort 9001
## If you want to listen on a port other than the one advertised in
## ORPort (e.g. to advertise 443 but bind to 9090), you can do it as
## follows. You'll need to do ipchains or other port forwarding
## yourself to make this work.
#ORPort 443 NoListen
#ORPort 127.0.0.1:9090 NoAdvertise
## If you want to listen on IPv6 your numeric address must be explictly
## between square brackets as follows. You must also listen on IPv4.
#ORPort [2001:DB8::1]:9050
## The IP address or full DNS name for incoming connections to your
## relay. Leave commented out and Tor will guess.
#Address noname.example.com
## If you have multiple network interfaces, you can specify one for
## outgoing traffic to use.
## OutboundBindAddressExit will be used for all exit traffic, while
## OutboundBindAddressOR will be used for all OR and Dir connections
## (DNS connections ignore OutboundBindAddress).
## If you do not wish to differentiate, use OutboundBindAddress to
## specify the same address for both in a single line.
#OutboundBindAddressExit 10.0.0.4
#OutboundBindAddressOR 10.0.0.5
## A handle for your relay, so people don't have to refer to it by key.
## Nicknames must be between 1 and 19 characters inclusive, and must
## contain only the characters [a-zA-Z0-9].
## If not set, "Unnamed" will be used.
#Nickname ididnteditheconfig
## Define these to limit how much relayed traffic you will allow. Your
## own traffic is still unthrottled. Note that RelayBandwidthRate must
## be at least 75 kilobytes per second.
## Note that units for these config options are bytes (per second), not
## bits (per second), and that prefixes are binary prefixes, i.e. 2^10,
## 2^20, etc.
#RelayBandwidthRate 100 KBytes # Throttle traffic to 100KB/s (800Kbps)
#RelayBandwidthBurst 200 KBytes # But allow bursts up to 200KB (1600Kb)
## Use these to restrict the maximum traffic per day, week, or month.
## Note that this threshold applies separately to sent and received bytes,
## not to their sum: setting "40 GB" may allow up to 80 GB total before
## hibernating.
##
## Set a maximum of 40 gigabytes each way per period.
#AccountingMax 40 GBytes
## Each period starts daily at midnight (AccountingMax is per day)
#AccountingStart day 00:00
## Each period starts on the 3rd of the month at 15:00 (AccountingMax
## is per month)
#AccountingStart month 3 15:00
## Administrative contact information for this relay or bridge. This line
## can be used to contact you if your relay or bridge is misconfigured or
## something else goes wrong. Note that we archive and publish all
## descriptors containing these lines and that Google indexes them, so
## spammers might also collect them. You may want to obscure the fact that
## it's an email address and/or generate a new address for this purpose.
##
## If you are running multiple relays, you MUST set this option.
##
#ContactInfo Random Person <nobody AT example dot com>
## You might also include your PGP or GPG fingerprint if you have one:
#ContactInfo 0xFFFFFFFF Random Person <nobody AT example dot com>
## Uncomment this to mirror directory information for others. Please do
## if you have enough bandwidth.
#DirPort 9030 # what port to advertise for directory connections
## If you want to listen on a port other than the one advertised in
## DirPort (e.g. to advertise 80 but bind to 9091), you can do it as
## follows. below too. You'll need to do ipchains or other port
## forwarding yourself to make this work.
#DirPort 80 NoListen
#DirPort 127.0.0.1:9091 NoAdvertise
## Uncomment to return an arbitrary blob of html on your DirPort. Now you
## can explain what Tor is if anybody wonders why your IP address is
## contacting them. See contrib/tor-exit-notice.html in Tor's source
## distribution for a sample.
#DirPortFrontPage /etc/tor/tor-exit-notice.html
## Uncomment this if you run more than one Tor relay, and add the identity
## key fingerprint of each Tor relay you control, even if they're on
## different networks. You declare it here so Tor clients can avoid
## using more than one of your relays in a single circuit. See
## https://www.torproject.org/docs/faq#MultipleRelays
## However, you should never include a bridge's fingerprint here, as it would
## break its concealability and potentially reveal its IP/TCP address.
##
## If you are running multiple relays, you MUST set this option.
##
## Note: do not use MyFamily on bridge relays.
#MyFamily $keyid,$keyid,...
## Uncomment this if you want your relay to be an exit, with the default
## exit policy (or whatever exit policy you set below).
## (If ReducedExitPolicy, ExitPolicy, or IPv6Exit are set, relays are exits.
## If none of these options are set, relays are non-exits.)
#ExitRelay 1
## Uncomment this if you want your relay to allow IPv6 exit traffic.
## (Relays do not allow any exit traffic by default.)
#IPv6Exit 1
## Uncomment this if you want your relay to be an exit, with a reduced set
## of exit ports.
#ReducedExitPolicy 1
## Uncomment these lines if you want your relay to be an exit, with the
## specified set of exit IPs and ports.
##
## A comma-separated list of exit policies. They're considered first
## to last, and the first match wins.
##
## If you want to allow the same ports on IPv4 and IPv6, write your rules
## using accept/reject *. If you want to allow different ports on IPv4 and
## IPv6, write your IPv6 rules using accept6/reject6 *6, and your IPv4 rules
## using accept/reject *4.
##
## If you want to _replace_ the default exit policy, end this with either a
## reject *:* or an accept *:*. Otherwise, you're _augmenting_ (prepending to)
## the default exit policy. Leave commented to just use the default, which is
## described in the man page or at
## https://www.torproject.org/documentation.html
##
## Look at https://www.torproject.org/faq-abuse.html#TypicalAbuses
## for issues you might encounter if you use the default exit policy.
##
## If certain IPs and ports are blocked externally, e.g. by your firewall,
## you should update your exit policy to reflect this -- otherwise Tor
## users will be told that those destinations are down.
##
## For security, by default Tor rejects connections to private (local)
## networks, including to the configured primary public IPv4 and IPv6 addresses,
## and any public IPv4 and IPv6 addresses on any interface on the relay.
## See the man page entry for ExitPolicyRejectPrivate if you want to allow
## "exit enclaving".
##
#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports on IPv4 and IPv6 but no more
#ExitPolicy accept *:119 # accept nntp ports on IPv4 and IPv6 as well as default exit policy
#ExitPolicy accept *4:119 # accept nntp ports on IPv4 only as well as default exit policy
#ExitPolicy accept6 *6:119 # accept nntp ports on IPv6 only as well as default exit policy
#ExitPolicy reject *:* # no exits allowed
## Bridge relays (or "bridges") are Tor relays that aren't listed in the
## main directory. Since there is no complete public list of them, even an
## ISP that filters connections to all the known Tor relays probably
## won't be able to block all the bridges. Also, websites won't treat you
## differently because they won't know you're running Tor. If you can
## be a real relay, please do; but if not, be a bridge!
##
## Warning: when running your Tor as a bridge, make sure than MyFamily is
## NOT configured.
#BridgeRelay 1
## By default, Tor will advertise your bridge to users through various
## mechanisms like https://bridges.torproject.org/. If you want to run
## a private bridge, for example because you'll give out your bridge
## address manually to your friends, uncomment this line:
#PublishServerDescriptor 0
## Configuration options can be imported from files or folders using the %include
## option with the value being a path. If the path is a file, the options from the
## file will be parsed as if they were written where the %include option is. If
## the path is a folder, all files on that folder will be parsed following lexical
## order. Files starting with a dot are ignored. Files on subfolders are ignored.
## The %include option can be used recursively.
#%include /etc/torrc.d/
#%include /etc/torrc.custom
Loading…
Cancel
Save