diff --git a/ap/id3v2/id3v2-0.1.11.tar.gz.sha1 b/ap/id3v2/id3v2-0.1.11.tar.gz.sha1
new file mode 100644
index 00000000..d70d8883
--- /dev/null
+++ b/ap/id3v2/id3v2-0.1.11.tar.gz.sha1
@@ -0,0 +1 @@
+ca825d851ca0c6a5783af107dc6baa7aa93f0bad  id3v2-0.1.11.tar.gz
diff --git a/ap/id3v2/id3v2.SlackBuild b/ap/id3v2/id3v2.SlackBuild
new file mode 100755
index 00000000..4cb1e9f0
--- /dev/null
+++ b/ap/id3v2/id3v2.SlackBuild
@@ -0,0 +1,168 @@
+#! /bin/sh
+#
+# by: H4kTeUr - http://www.slackbuilds.net < h4kteur at slackbuilds dot net >
+# Copyright 2007, 2008 H4kTeUr. All rights reserved.
+#
+# Redistribution and use of this software, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this software must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# Latest id3v2 sourcecode is available at http://id3v2.sourceforge.net
+# Depends: l/id3lib
+
+set -e
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=${PKG:-$TMP/package-id3v2}
+OUT=${OUT:-$TMP/build}
+
+# version on the tarball
+VERSION=${VERSION:-0.1.11}
+# version used in the source directory to cd into
+DIRVER=${DIRVER:-0.1.11}
+# version used for the Slackware package
+PKGVER=${PKGVER:-0.1.11}
+
+# target
+ARCH=${ARCH:-i486}
+BUILD=${BUILD:-2_SBn}
+
+# set tarball download link
+SOURCE=${SOURCE:-http://switch.dl.sourceforge.net/sourceforge/id3v2/id3v2-$VERSION.tar.gz}
+ARCHIVE=$(basename $SOURCE)
+
+# sanity checks
+if [ "$(id -u)" = "0" ]; then
+    echo "Do not run this SlackBuild as ROOT !"
+    exit 1
+fi
+
+if [ ! -d $TMP ]; then
+    mkdir -p $TMP
+fi
+
+# download the tarball if it's not found
+if [ ! -r $ARCHIVE ]; then
+    echo "Downloading $ARCHIVE..."
+    rm -f $ARCHIVE.part
+    wget -vc $SOURCE -O $ARCHIVE.part
+    mv $ARCHIVE.part $ARCHIVE
+fi
+
+# check SHA1 sums
+if [ -r $ARCHIVE.sha1 ]; then
+    sha1sum -c $ARCHIVE.sha1
+else
+    echo "$ARCHIVE.sha1 SHA1 sums not found !"
+    exit 1
+fi
+
+if [ "$ARCH" = "i386" ]; then
+    SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+elif [ "$ARCH" = "i486" ]; then
+    SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "i686" ]; then
+    SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+elif [ "$ARCH" = "x86_64" ]; then
+    SLKCFLAGS="-O2"
+fi
+
+# cleanup
+rm -rf $PKG
+mkdir -p $PKG
+
+# extraction
+cd $TMP
+rm -rf id3v2-$DIRVER
+tar -xvf $CWD/id3v2-$VERSION.tar.gz
+cd id3v2-$DIRVER
+
+# make sure ownerships and permissions are sane
+chmod -R a-s,u+rw,go-w+r .
+
+for patch in fix-gcc-4.2 fix-segfault; do
+    if [ -r $CWD/patches/id3v2-$VERSION-$patch.patch ]; then
+        cat $CWD/patches/id3v2-$VERSION-$patch.patch | patch -p1
+    else
+        echo "ERROR: No id3v2-$VERSION-$patch.patch found!"
+        exit 1
+    fi
+done
+
+# build
+CXXFLAGS=$SLKCFLAGS \
+make PREFIX=/usr -j3
+
+# add the install directories
+mkdir -p $PKG/usr/bin
+mkdir -p $PKG/usr/man/man1
+
+# install
+install -m 755 id3v2 $PKG/usr/bin
+nroff -man id3v2.1 > $PKG/usr/man/man1/id3v2.1
+
+# strip binaries
+echo "Stripping binaries..."
+find $PKG -type f | xargs file | grep "LSB executable" | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null || \
+    echo "No binaries to strip..."
+
+# compress and link manpages, if any
+echo "Compressing man pages..."
+if [ -d $PKG/usr/man ]; then
+    find $PKG/usr/man -type f -name "*.?" -exec gzip -9 {} \;
+    for manpage in $(find $PKG/usr/man -type l) ; do
+        ln -s $(readlink $manpage).gz $manpage.gz
+        rm -f $manpage
+    done
+fi
+
+# add a documentation directory
+echo "Adding documentation package..."
+mkdir -p $PKG/usr/doc/id3v2-$PKGVER
+install -p -m 644 \
+    COPYING INSTALL README \
+    $PKG/usr/doc/id3v2-$PKGVER
+
+# build the package
+mkdir -p $PKG/install
+if [ -r $CWD/slack-desc ]; then
+    install -m 644 $CWD/slack-desc $PKG/install
+fi
+
+if [ -r $CWD/doinst.sh ]; then
+    install -m 755 $CWD/doinst.sh $PKG/install
+fi
+cd $PKG
+
+PACKAGING="
+    chown -R root.root .
+    find . -perm 664 -exec chmod 644 {} \;
+    find . -perm 777 -exec chmod 755 {} \;
+    mkdir -p $OUT
+    rm -f                   $OUT/id3v2-$PKGVER-$ARCH-$BUILD.tgz
+    /sbin/makepkg -l y -c n $OUT/id3v2-$PKGVER-$ARCH-$BUILD.tgz
+    rm -rf $PKG
+    rm -rf $TMP/id3v2-$DIRVER
+"
+
+if [ "$(which fakeroot 2> /dev/null)" ]; then
+    echo "$PACKAGING" | fakeroot
+else
+    su -c "$PACKAGING"
+fi
+
+exit 0
diff --git a/ap/id3v2/patches/id3v2-0.1.11-fix-gcc-4.2.patch b/ap/id3v2/patches/id3v2-0.1.11-fix-gcc-4.2.patch
new file mode 100644
index 00000000..b264467b
--- /dev/null
+++ b/ap/id3v2/patches/id3v2-0.1.11-fix-gcc-4.2.patch
@@ -0,0 +1,41 @@
+Les sous-répertoires id3v2-0.1.11.orig/debian et id3v2-0.1.11/debian sont identiques.
+diff -up id3v2-0.1.11.orig/frametable.h id3v2-0.1.11/frametable.h
+--- id3v2-0.1.11.orig/frametable.h	2000-05-02 22:32:26.000000000 +0200
++++ id3v2-0.1.11/frametable.h	2008-03-03 22:44:51.000000000 +0100
+@@ -24,9 +24,9 @@
+ #include <id3/globals.h>
+ 
+ struct frameTbl {
+-  char *frameName;
++  const char *frameName;
+   enum ID3_FrameID frameID;
+-  char *frameLongName;
++  const char *frameLongName;
+ }; 
+ 
+ static struct frameTbl frameTable[] = {
+diff -up id3v2-0.1.11.orig/genre.cpp id3v2-0.1.11/genre.cpp
+--- id3v2-0.1.11.orig/genre.cpp	2004-05-04 21:44:28.000000000 +0200
++++ id3v2-0.1.11/genre.cpp	2008-03-03 22:45:17.000000000 +0100
+@@ -26,7 +26,7 @@
+ #include <string.h>
+ 
+ 
+-char *genre_table[] = {"Blues",
++const char *genre_table[] = {"Blues",
+                        "Classic Rock",
+                        "Country",
+                        "Dance",
+Les sous-répertoires id3v2-0.1.11.orig/id3v2-0.1.10 et id3v2-0.1.11/id3v2-0.1.10 sont identiques.
+diff -up id3v2-0.1.11.orig/list.cpp id3v2-0.1.11/list.cpp
+--- id3v2-0.1.11.orig/list.cpp	2004-05-04 19:41:15.000000000 +0200
++++ id3v2-0.1.11/list.cpp	2008-03-03 22:45:00.000000000 +0100
+@@ -26,7 +26,7 @@
+ #include "frametable.h"
+ #include "genre.h"
+ 
+-char *GetDescription(const ID3_FrameID eFrameID)
++const char *GetDescription(const ID3_FrameID eFrameID)
+ {
+   for(int ii = 0; ii < frameTableCount; ii++ )
+   {
diff --git a/ap/id3v2/patches/id3v2-0.1.11-fix-segfault.patch b/ap/id3v2/patches/id3v2-0.1.11-fix-segfault.patch
new file mode 100644
index 00000000..cf310c43
--- /dev/null
+++ b/ap/id3v2/patches/id3v2-0.1.11-fix-segfault.patch
@@ -0,0 +1,12 @@
+--- id3v2-0.1.11/id3v2.cpp.orig	2008-03-03 22:28:17.000000000 +0100
++++ id3v2-0.1.11/id3v2.cpp	2008-03-03 22:32:50.000000000 +0100
+@@ -423,7 +423,8 @@
+         {
+           // check if there is a total track number and if we only have 
+           // the track number for this file.  In this case combine them.
+-          char *currentTrackNum, *newTrackNum;
++          char *currentTrackNum = NULL;
++          char *newTrackNum = NULL;
+ 
+           if (pFrame != NULL) 
+           {
diff --git a/ap/id3v2/slack-desc b/ap/id3v2/slack-desc
new file mode 100644
index 00000000..2383b6ac
--- /dev/null
+++ b/ap/id3v2/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+id3v2: id3v2 (a command line editor for id3v2 tags)
+id3v2:
+id3v2: id3v2 is a command line editor for id3v2 tags.
+id3v2:
+id3v2:
+id3v2:
+id3v2:
+id3v2:
+id3v2:
+id3v2:
+id3v2: